Snowbee Screw In Wader Studs

Snowbee Screw In Wader Studs can be used in most types of waders or wading boots, the hexagonal heads give additional grip in slippery conditions and can be easily screwed in with a hexagonal head socket, or a cross-head screwdri­ver.

For best results, insert six studs around the edges of the heel area and if required, a similar number around the toe area and the instep a­rea.

It is not recommended to insert studs into the main weight bearing mid-sole area. Inserting studs in this area may result in the studs puncturing the inner sole. Always check the depth of the sole in relation to the stud length before you begin. If there is any doubt or the sole is too thin for the length of stud. DO NOT INSERT STUDS.

• Super hard
• zinc plated steel studs
• give additional grip to felt or cleated sole waders.
• 40 studs in the box